Видео

Oh, I see what you are talking about..so I already mounted the Garmin Striker Base to the top circle plate. If you look close at 1:31 you can see the Ram Base under the Garmin Striker Base.

Thank you very much, glad you enjoyed

What transducer are you using? I believe it should be Chirp 77, Chirp 200, 77, and 200 options.

at 3:59, you can see it is facing the injector...I also use the small looking dot directly across that you can see between 2 bolts as a reference.

@@1Cast1Fish /Thank you. I will look in the morning and let you know. I have a 75 etcch motor, 3 cylinder. Thanks again.

Can u do most or all the maintenance yourself? Do you have a shop that will touch it? If yes and it’s a heck of a good deal and low hours… get it checked out and might be worth it if it’s good to go. If you don’t have a shop or can’t do maintenance yourself…honestly you may want to stay clear…not because they are bad motors… they are great. But you will need extra support and it’s getting harder and harder to find shops who will mess with them.

@@1Cast1Fish Yes I am an automotive technician by trade but I do all of my marine work myself at the house. We don’t have any local supply stores anymore. One of them closed down a couple months ago so I would have to order all the parts online. I was wondering if injectors and EMM’s were still readily available.

They are to some extent, slight premium on pricing though. They still have a parts network out there, just not as robust as before. There are places that will rebuild the EMM to.

I don't want to speak wrong as I don't have experience with every model and HP. I would check online for a parts breakdown for your specific model and serial number to be 100% sure.

Yes, you should get at least a full day out of it.

I might be missing something on my settings? Not sure,

Nope not at all, your settings sound great if you are seeing the fish. So the slanted arch's are fish that only slightly entered the sonar cone and then exited...the streak is because they are likely feeding and changing depth rapidly. This is a good thing to see for hungry fish.

@@1Cast1Fish awesome thank you for the help

Most likely unfortunately, they are easy to replace, but a different approach may be needed in the future

I do not have any videos showing this unfortunately, sorry I could not help, but hope you are doing well and can find what you are looking for.

I believe so, I believe that it works for both...but not 100% sure, but they share the same base mount.

I used the top to mount to the fishfinder base, I removed the bottom so I can attach it to a 1" ball mount on the kayak rail.

I was a great morning…perfect weather

You bet, it’s great to get out on the water and catch a few.

Awesome, enjoy and good luck

I prefer a natural color, but the fish don't see the top.;lol I try to find ones with a silver or white bottom mostly as they tend to look like a baitfish when viewed from beneath. I like 30lb braid, it casts great and is thick enough not to bite down on itself on the spool. Only thing with braid is the need to be a bit softer on hooksets and landing fish due to the zero stretch. (It's easier to pull the hooks out IMO)

@@1Cast1Fish thanks!!

Thank you, hope u are doing well

Is it by chance already on the Home Screen?

This is a Pflueger Patriarch and an old Carrot Stix MH Rod. Both are about 12-14 years old...LOL so no longer made

I have never done a jetski install, so I don't want to steer you wrong, I would look up some videos of a jetski install and see what others are doing. I would think there would be a way to do it without holes.

Good choice

@@1Cast1Fish 🙏🙏🙏

These may help ruclips.net/video/WkdDq-SrjFc/видео.html ruclips.net/video/0r_Cxl-a6oI/видео.html

So first you have to have a thermocline...many bodies of water do not. Next it will look like a thin line of clutter in the water column and many times you will see increased clutter below this line as well but not always. Fish should be above the thermocline.

@@1Cast1Fish almost all lake where i fish have a thermocline. Im in WA. And i fish for Kokanee(land lock salmon). So being able to find the thermocline is important.

I would call Garmin if under warranty...mine did not shake alot, but a buddy of mine had one that did...ended up replacing the whole mount to solve issue. If it does not do it when in open water, it may just be the weeds have it off balance. My buddies shook all the time.

@@1Cast1Fish dang man thank you. I appreciate your reply!

Honestly I stay as far away from DC as possible...LOL How far south are you willing to drive? Plenty of spots down here around Stafford and Fredericksburg I can help with.

@@1Cast1Fish I see it's on the map of the area I'm looking at. It's just an hour south of the Capitol Grounds, which is not all that far, barring traffic.

how long would a swift kayak trip be from dc to stafford, i wonder. I can get picked up there, but it might be too rushed to fish along the way.

You mean floating from DC down?

@@1Cast1Fish That's what I was thinking, but it might be wiser to do a shorter float, and "stay out of the city"

I would expect just under half of what I got with the 10Ah

Glad it was helpful!

Glad it helped!

Settings > Alarms > Sonar > Fish This will give you 3 options for alarms, however the alarm volume is not able to be adjusted.

They do not overwrite, but you must be sure the FF's are compatible for data transfer.

A-Scope will be helpful, but also play around with colors and see if one makes them pop out more than another. Also adjusting your gain/sensitivity manually can also help sometimes.

I will try these methods, Thanks!

Thank you so much, glad you have enjoyed

They seem to be spreading, I love them though

@@1Cast1Fish very fascinating species

@@Pertfamoutdoors they are fun to catch and taste great

@@1Cast1Fish always down to catch something new and probably would try it.

That will work also, great additional tip and info Thanks for watching

Congrats and good luck out there :)

Yeah they tend to get pretty nasty sometimes...lol Hope you had a great weekend as well :)

I am making the assumption that the unit is showing fish and the water column, just not the active depth number. (let me know if this is not the case as it changes things a bit) 1st make sure the depth is turned on in the settings for your overlays I would check all the pins and holes to make sure nothing is broke, bent, or dirty (Both transducer and unit) Possible need to try a factory reset If you still have problems Garmin Warranty and Tech Support is pretty good IMO, also if out of warranty and your not in to big of hurry, I have my units and transducers and we can swap a few parts out and see what happens sometime

I get my bait at Sturgeon Creek Marina, they are the biggest minnows they carry, about $18 a dozen (This is why many catch there own bait) They work very well, and are much easier to keep alive than the shad you catch on the lake. As far as a general location, Sturgeon Creek Marina is great as well, since this last week or so big schools of Striper have been in the main lake right outside of Sturgeon Creek. I would be looking for fish on either side of the 208 Bridge down to the Power Plant. Odds are you will see others Striper fishing these areas as the fish will likely be here through the summer. Good Luck

They are more than likely close to under or just behind. Depends on depth and transducer cone size.

The speed is able to be shown or hidden in the overlay menu. As far as the depth flashing, I will assume it is while on plane? Depending on boat hull, speed, and transducer location it sounds like you are just losing contact. The transducer may be in a dirty water (turbulent or air bubbles) area, it could be mounted to high, or it just is not making enough water contact due to speed and lift of the hull. Does the depth come back when you slow down? On my boat, when on plane at full speed, the transducer is literally out of the water....so no reading, I use a second in hull mount transducer for on plane depth reading. What type of boat and speeds you running?

@@1Cast1Fish I think you nailed. It does stop flashing when I slow the boat down. I’ll double check again. Also, may I please ask you to walk me through the process for displaying the speed in the overlay menu. I don’t think I’m familiar with the “overlay” menu. Thanks again for providing us with great content!

From a sonar screen, press Menu > Scroll down to Overlay Numbers. Speed: Shows the vessel's current speed.

@@1Cast1FishThank you!!

@@1Cast1Fish One more quick question: How do I change the fish symbols to arches?? Thanks bunches!!!

I used the Lucas on my old boat for the same reason...it was simpler to use 1 grease vs 2.

Awesome, thank you!

So I always want to be as honest as possible with my opinions on questions like this. I personally would use the GT20 that comes with the 4CV, it is a upgrade over the standard transducer already. The truth is, even though the transducer may say a max depth of 1500ft, that is perfect conditions...that never really exist. Normally transducers are functional to about 1/2 to 3/4 of the advertised Max Depth. Sure they will go deeper, but I think performance starts to suffer. As for a new transducer, you will spend 200+ on a higher end transducer, more than the fish finder itself. I would save for a larger unit with a bigger screen for those depths over a new transducer. The bigger screen will help much more IMO for seeing targets, especially at those depths.

If I drop my bait down and I can not see it after about 6 -8" then that is dirty If I drop my bait down and I can not see it after about 8-12" then that is stained

@@1Cast1Fish Okay but I’m my mind, if the lure can’t be seen after 12”, the water is just dirtier. LoL 😂

LOL....I think of stained as water with alot of tannins from wood and such...many of our rivers and lakes you can see this as well.

Thank You

The speed shown on the screen is the GPS Speed. This can be shown by adjusting your screen overlays

I don't think it can be

@1Cast1Fish That is unfortunate. I called Garmin also. They are aware that this is a problem for some users and may address the issue in future iterations of their product. In the meantime, I'll deal with it and enjoy the other features. Thanks for responding.

Your welcome, any questions just ask...I do my best to respond and help

Factory reset it each time, that way you get to at least start at a common starting spot each time you use it....who knows what others have messed with.

@@1Cast1Fish thanks for replying. How would I do this factory reset?

@@1Cast1Fish never mind I just looked it up. Thanks much for the info 🎣.

Glad you got it figured out...Good luck out there

@@1Cast1Fish thanks sir! Best of luck to you as well 🎣👍